▶VIBRATOR

▶ MAIN FEATURES

1.1 The cardboard splicing arm is equipped with a paper pressing device to make the cardboard smooth falling; and the front catching platform adopts pneumatic lifting structure, which can adapt to the die of different printing machines.

1.2 The front of vibrator is equipped with a medium pressure fan to achieve the effect of cleaning waste, and in the same time to make sure the cardboard can be fastened to the conveyor belt and transport smoothly.

1.3 The cleaning device is composed of double vibrating cleaning structure, each vibrating cleaning structure is driven by independent motor, and get a better cleaning effect by different jitter frequency.

1.4 Dithering belt adopts imported cylindrical high elastic belt, which is not easy to aging; it is not easy to damage cardboard under high-speed dithering.

1.5 The cylindrical belt shaft with semi-circular groove can adjust the belt position freely, adapt to the production demand of all kinds of special-shaped paperboard, and realize distribution of one to two, one to three cardboards.

1.6 The back end of vibrator is equipped with an axial flow fan and brush device to make the shaken waste paper fall from the cardboard to achieve the best effect of the waste cleaning.

1.7 The two sides of vibrator are equipped with a flat belt and a waste paper guide board at the back end of vibrator, which is convenient to completely output the waste paper and saves the waste paper cleaning work.

1.8 All motors of vibrator are controlled by independent button and can be operated separately according to production demand.

▶COUNTER STACKER

 ▶MAIN FEATURES

1.1 The cardboard conveyor platform adopts a new type of aluminum structure, reduces the weight of the machine, adjusts conveniently, and can meet all kinds of production requirements. The platform is controlled by hydraulic system, the structure is reliable and the operation is stable.

1.2 Cardboard counting structure composed of back-end cardboard holding part and PLC and photoelectric switch, the counting is accurate and fast. and realize distribution of one to two, one to three cardboard.

1.3 Auto stacker can realize automatic and manual operation mode according to different requirements. The front cardboard splicing platform adopts pneumatic lifting structure, which makes easy disassemble and assemble of wooden die.

1.4 The front cardboard splicing arm is equipped with a paper pressing device to make the paperboard more stable moving; the back-end is equipped with a sun wheel cardboard pressing device to make the cardboard fall horizontally.

1.5 The cardboard splicing baffle can adjust according to cardboard length manually by handwheel, so as to adapt to stack different shapes of cardboard.

1.6 Can realize 180-200/250 sheets per minute, and flexibly adapt to the products requirements of 1 to 2, 1 to 3, and 1 to 4 sheets from Right to Left side cutting; 1 to 4, 1 to 6 sheets from both Right to Left and Front to Back cutting.

1.7 Main components and suppliers: Taiwan Fatek PLC 、 Inovance frequency converter, Schneider low voltage electrical appliances, Taiwan CPG motor, FK bearings.